Edmonds Product Support Materials
The following are informative PDF documents for the Edmonds ecoPOWER and Hurricane product line.
Commercial Ventilation 69 pages
Industrial Hurricane ecoPOWER and Accessories
Standard for Natural Ventilators
These documents give you knowledge of our products and their applications and installation.
Below is an Overview of the Edmonds Product Line:
ECOPOWER hybrid rooftop ventilator
CSR Edmonds’ ecoPOWER is the world’s first true hybrid ventilation system. ecoPOWER is a patented design that adds modern electronic commutating motor technology to the high performance Hurricane ventilator. The design allows the ventilator to spin freely without power to provide the same air flow rate as the Hurricane vent. In power mode, the flow increases by a factor of between 4-5 times the wind powered performance.
Below are model numbers and throat sizes and a description of each series:
EP400C 16 inches diameter ECOPOWER Complete with Varipitch and flashing
EP600C 24 inches diameter ECOPOWER Complete with Varipitch and flashing
EP900C 36 inches diameter ECOPOWER Complete with Varipitch and flashing
Head only
EP400H 16 inches diameter ECOPOWER Head only
EP600H 24 inches diameter ECOPOWER Head only
EP900H 36 inches diameter ECOPOWER Head only
EP900TC Optional Temperature Controller for the 900 only
HURRICANE turbine rooftop ventilator
The Hurricane Turbine Ventilator has a unique vertical vane design which
considerably increases its exhaust capacity over traditional spherical vane vent designs and gravity vents with flat rain tops.The use of a double race bearing system enables a 15 year warranty to be offered on the product. It is priced as a complete unit or as a head only. The complete unit includes a variable pitch base which adjusts to roof angles from 0º to 45º for sizes 100mm – 600mm and 0º to 22.5º for 700mm-900mm and it comes with standard base flashing.
Model numbers use the letter H followed by the size in mm and either C or H for “Complete” or “Head only”
H100C is 4 inches diameter
Other sizes are 150 (6) 300 (12) 400 (16) 450 (18) 500 (20) 600 (24) 700 (28) 800 (32) and 900 (36).
Hurricane Head Only
Model numbers use the letter H followed by the size in mm followed by H
H100H is 4 inches diameter top only.
Other sizes are 150 (6) 300 (12) 400 (16) 450 (18) 500 (20) 600 (24) 700 (28) 800 (32) and 900 (36).
Hurricane S2
Edmonds Hurricane S2 has been developed for harsh environments such as water storage facilities and sewer pipe ventilation etc. The Hurricane S2 is powder
coated inside and out and is fitted with a bearing cone deflector.
Model numbers use the letter H followed by the size in mm followed by S2 and either C or H for “Complete” or “Head only”
H100S2C is 4 inches diameter
Other sizes are 150 (6) 300 (12) 400 (16) 450 (18) 500 (20) and 600 (24)
Hurricane S2 Head only
Model numbers use the letter H followed by the size in mm followed by S2T
H100S2H is 4 inches diameter
Other sizes are 150 (6) 300 (12) 400 (16) 450 (18) 500 (20) and 600 (24)
Fire Rated Hurricane
Edmonds Hurricane H900 FR (Fire Rated) has been developed to be used as a smoke release ventilator as well as natural ventilation. It has been tested by the CSIRO to AS 1668.1-1998 Section 4.8.
HFRC is 36 inches diameter complete unit
HFRH is 36 inches diameter
Heavy Industrial Hurricane
Edmonds H900 HI (Heavy Industrial) has been developed to be used in harsh environments where trace elements of acids may be found ie: caustic soda & sulphuric acid. It comes powder coated.
H900HI has a 36 inches diameter throat.
Dampers manually operated
Manually operated dampers fit to the throat of Hurricaness and ecoPowers and allow controllable ventilation. The dampers can be operated by the use of a cord.
Model numbers use the letter DC followed by the size in mm
DC300 is 12 inches diameter
Other sizes are 400 (16) 450 (18) 500 (20) 600 (24) 700 (28) 800 (32) and 900 (36).
Dampers electrically operated
Electrically operated dampers fit into a Hurricane or ecoPower flashing or special base and allows remotely wired operation. The dampers can be operated by a manual switch or thermostatically controlled switch.
Model numbers use the letter DE followed by the size in mm
DE300 is 12 inches diameter
Other sizes are 400 (16) 450 (18) 500 (20) 600 (24) 700 (28) 800 (32) and 900 (36).
Egg crate grilles
Egg crate grilles are used in buildings with fixed or false ceilings to both cover openings in the ceiling and to allow hot air beneath the ceiling to escape.
Model numbers use the letter E followed by the size in mm
E300 is 12 inches diameter
Other sizes are 400 (16) 450 (18) 500 (20) 600 (24) 700 (28) and 800 (32)
INDUCT vents for sewer systems
Used as an air inlet point in sewer systems, the design of the unit ensures the face is always directed towards the wind. These are powder coated Cottage Green inside and out.
ID150 6 inches diameter , ID225 9 inches and ID300 12 inches.
E DUCT vents for sewer systems
Used as an air extraction point in sewer systems. The E Duct is powder coated Cottage Green inside and out and is fitted with a bearing cone deflector.
ED150 6 inches diameter , ED225 9 inches and ED300 12 inches.
Air inlet vents
Static Ventilators have been developed to be used for air intake points on water storage facilities and other applications. They have a mill finish and come with integrated bird mesh.
Model numbers use the letter SV followed by the size in mm
SV150 is 6 inches diameter
Other sizes are 300 (12) 400 (16) 450 (18) 500 (20) and 700 (28).